Step by step instructions to gluing inner corners
When finishing, the main problem can be uneven walls and the resulting folds on the background. It’s also essential to take into consideration that if the walls are crooked, the joints of background canvases can invisibly.
After gluing the last one in front of the interior corner of the fabric should measure the remaining distance. It’s measured from the border of the pasted cloth to the adjacent wall, so the resulting amount is added 10-15 millimeters. If the partitions are extremely curved, the additional figure may be more.
Cut a strip equal to the resultant figure, taking into account the allowance. The surfaces are treated with glue. Based on the type of coat it could be only the wall or surfaces.
The strip is glued independently with the cut side into the wall. The background should go on the opposite airplane.
In case the glued wallpaper is wrinkled, you need to make a few tiny cuts perpendicular to the folds.
Level or slope on the adjacent wall is a vertical lineup. The distance in the corner is equivalent to the diameter of the preceding cut strip, never including additions.
The surfaces are smeared with glue, and then the coat is glued into the wall with the flat side towards the line. The cut goes on the adjoining wall.
Protruding corner ought to be pasted by analogy using an interior, however there are little gaps, which also need to be taken into account when working.
Measured the distance remaining out of the glued wallpaper to the adjacent wall. Add 20-25 millimeters to the captured figure.
A section is cut away, considering the added 20-25 millimeters.
Prior to gluing, the surfaces have been treated with adhesive.
The edge has to be glued into the wallpaper fixed onto the wall, the own cut facet”extends” to the adjacent plane gidpola.ru. If necessary, small cuts are made in the place of visiting another wallpaper, smoothed and pushed into the wallsocket.
Draw a vertical strip on the adjoining wall in a distance of just glued cut strip plus 6-10 millimeters.
After applying the adhesive, the strip is placed on the wall with its flat side into the marked line, moving over the edge of the glued strip.
The joints have been smeared with glue and ironed using a roller. After that, the upper layer is cut across the ruler and the two layers are joined together.